Antennas for P25RX, P25RX-ll or MicroP25RX

What kind of antenna are you using for indoor, outdoor, multiband or 800MHZ ?

Thanks

Steve

P25RX in my truck I use the little mag mount whip that Todd shipped with the unit.

I use an REM-800, an REM-810S, and the mag mount whip that came with my original P25RX unit.

I use Remtronix REM-810S and no longer available ST-2 outdoor antenna.

Thanks for replying, everyone. The reason I am asking is that I am on the hunt for another antenna. I am currently using a discone antenna mounted 20ft in the air, outdoors. This works good for a 3-site simulcast P25 system on Todd's P25RX series of receivers and a BCD536HP scanner. I also use a REM-810s, a Larsen tri-band antenna and the antennas that Todd supplies with his units, which all work ok for indoor purposes. Lastly, I use a flat panel amplified HDTV indoor antenna. This antenna gives the best performance for all of my receivers/scanners by at least 10db signal boost. This is strange but true!
Anyone out there use an antenna that they would suggest?

Thanks

Steve