- dcr_inc
- Posts : 36
Join date : 2023-04-13
Age : 65
Location : Delta, PA
low battery error
Fri 1 Dec - 11:51
When I power up my Nano, I get Power on followed by battery low 1.35V.. I can not get the zip code search to work.. I input my zip, select 15 miles, hit enter and it goes directly back to the monitor screen.
What am I doing wrong?.. And I added an SDCARD and formatted it via the Nano
What am I doing wrong?.. And I added an SDCARD and formatted it via the Nano
- Goldmyne99
- Posts : 50
Join date : 2023-04-10
Re: low battery error
Fri 1 Dec - 13:02
dcr_inc wrote:When I power up my Nano, I get Power on followed by battery low 1.35V..
The Low Battery error can be ignored in the Nano.
The Battery measurement is a feature that was added to the code for the Eagle Handheld prototype Todd is developing.
If you have a MicroP25RX, you can transfer the Micro's config info into the Nano by putting the Micro's ini file on to the Nano sdcard and run RESTORE.
EDIT : The zip code search needs the FCC DB files on the Nano sdcard. The DB file is found on the top link on the page https://bluetailtechnologies.com/pages/microp25rx-and-wio-firmware
BTT likes this post
- BTTAdmin
- Posts : 221
Join date : 2023-03-23
Re: low battery error
Fri 1 Dec - 19:19
I will get the battery message removed for the Nano in the next firmware updates.
Permissions in this forum:
You cannot reply to topics in this forum
|
|